NB! Cartridge sold separately.

Adflo with QRS connector - loaded with benefits.

Speedglas with Adflo is a breathing protection device for welders needing maximum mobility.

For more sedentary applications or environments requiring high safety factors, the Speedglas Fresh-air C (compressed air) system is recommended.

Adflo is comfortable to use, even in tight spaces. The unit is soft-rounded and has no projecting details that can fasten in surrounding objects.

The electronics constantly monitor the airflow and automatically adjust the motor output so that the airflow maintains a constant flow of 170 l/min.

Adflo is comfortable to sue even in very warm environments, such as when welding with hi-flow streaming or cutting. This is due to AirflowPlus, a function that increase the airflow from the normal 170 l/min to 200 l/min.

The fan has an ergonomically formed belt in leather. The belt is extra wide and cusioned around the fan unit in order to give the back a good level of support.

With the right filter configuration Adflo gives as good a protection against particles as it goes in respect of gas, in both cases with a constant airflow of 170 l/min, all in one single unit!

Replacing the filter is very fast with the welder not even needing to take the fan unit off to do so.

Note: Adflo and Fresh-air may never be used in spaces where an immediate health risk or mortal danger exists (IDLH-classed). Always consult your responsible H&S engineer.

All-in-one solution.

With the right filter configuration Adflo gives as good a protection against particles as it goes in respect of gas - all in one single unit! The filter cartridges can even be replaced individually as required. Replacing cartridges is very quick, as the welder does not even have to take off the fan unit. The Airflow Plus function gives extra airflow. The function is activated simply with an extra pressure on the ON button.

Supplied with one Lithium ion battery, which further reduces the weight.

The fan be be purchased with a standard or Heavy Duty battery. The batteries can either be charged in position in the fan unit, or separately in the new charger for Lithium ion batteries.

Complies with Eye Protection: EN 379, Face Protection - Welding Helmet: EN 175, Grinding visor: EN 166, Breathing protection: EN 12941 (TH2P, TH2 A1B1E1 P).

Protection factor: 200.

Filter: Particle filter P(SL). Gas filter: A1B1E1. Odour filter: Reduces unpleasent smells.

Airflow Nominal: 170 l/m. Airflow Plus: 200 l/m.

Weight Welding helmet: 750 g. Grinding visor: 505 g. Fand incl particle filter and standard batteryi: 950 g.